Toshiba SD-V57HTSU Home Theater System User Manual


 
40
Controlling Your TV with the Supplied Remote
The remote control can be compatible with various
brands of TV by setting their control codes. The TOSHI-
BA code has initially been set to control TOSHIBA TVs.
Setting TV Control Codes
1. Press TV to set the remote control operating
your TV.
2. While holding down PROGRAM button, enter
the two digits of your TV’s brand code (listed on
page 41) using number buttons.
3. Release PROGRAM.
By pressing You can
TV POWER Turn the TV on or off.
CH/TRK (
44
/
33
)To select TV channels in the upper
or lower direction.
VOLUME (
44
/
33
) Adjust the volume of the TV.
INPUT Switch the TV’s input source
between the TV and other input
sources.
Notes
For some brands, several control codes (brand
codes) are allocated. Try each of them until the but-
tons work on your TV.
If you replace the remote control’s batteries, set the
brand code again.
TV POWER
INPUT
PROGRAM
VOLUME
CH/TRK
Important
Some TV’s may not respond to all the operations
above, or may not be operated at all with this
remote control. In this case, operate your TV with
its own remote control.