Toshiba SD-V57HTSU Home Theater System User Manual


 
14
Radio Antenna Connections
Connect the supplied FM/AM antennas for radio listen-
ing.
1. Connect the AM loop antenna to the AM antenna
connectors.
2. Connect the FM wire antenna to the FM antenna
connectors.
Notes
To prevent noise pickup, keep the AM loop antenna
away from the DVD/VCR Receiver and other compo-
nents.
Be sure to fully extend the FM wire antenna.
After connecting the FM wire antenna, keep it as hori-
zontal as possible.
Accessory Audio/Video (A/V)
Connections to DVD/VCR
Receiver
Connect the VCR IN LINE1 or LINE in 2 jacks on the
DVD/VCR Receiver to the audio/video out jacks on your
accessory component, using optional audio/video
cables.
Digital Device Connections
Connect the DIGITAL AUDIO IN (OPTICAL) jacks on
the DVD/VCR Receiver to the digital audio out (optical)
jacks on your digital device (Game device, Digital Set
Top Box, etc.), using optional optical audio cable.
To select source of DVD/VCR Receiver to OPTICAL IN,
press AUX on the remote control.
Notes
If the audio format of the digital output does not
match the capabilities of your DVD/VCR Receiver, the
DVD/VCR Receiver will produce a strong, distorted
sound or no sound at all.
The Optical input function is available only when the
other unit’s Sampling Frequency is 32 - 48kHz.
Rear of DVD/VCR Receiver
AM loop antenna (supplied)
Connections (Continued)
L
R
VIDEO
OUTPUT
AUDIO
OUTPUT
Rear of DVD/VCR Receiver
Front of DVD/VCR Receiver
OR
Rear of DVD/VCR Receiver
Digital Set Top BoxGame Device
OR