Filter
Top Products
71
12.8. All Input/Output Channel Gain Confirmation
[UTY] ALL FADER
POS I T IO
N
I
NOUT
• Gains of all input channels
can be simultaneously
confirmed. Channels are
Input Nos. 1 through 12
from left to right.
• Gains of all output channels
can be simultaneously
confirmed. Channels are
Output Nos. 1 through 8
from left to right.
RS-232C port settings (previous page)
12.9. All Input/Output VCA Status Confirmation (Only when the D-984VC is used)
[UTY] ALL VCA
POS I T IO
N
VC
I N
VCA
OUT
Module type confirmation
(next page)
• VCA status of all Input channels
can be simultaneously confirmed.
Channels are Input Nos.1
through 12 from left to right.
Maximum value: 0 V, Minimum
value: 5 V
• VCA status of all output channels
can be simultaneously confirmed.
Channels are Input Nos.1 through
8 from left to right. Maximum
value: 0 V, Minimum value: 5 V
All input/output channel gain confirmation (previous section)
Note
The above screens show the statuses of VCA input and output terminals.
When channels are set for the stereo link or group, all their gains change
synchronizing with the lowest numbered channel's gain. Irrespective of
these settings for channels, the VCA statuses are displayed for individual
channels as shown above.