Filter
Top Products
20
Output 1 Gain Settings
Output 8 Gain Settings
Output Channel Gain Settings
(p. 42)
Output Channel Group Trim Gain
Settings
(p. 42)
Delay Time Settings
(p. 51)
Slope Settings (High Frequency)
Cutoff frequency settings
Q settings
Q2 settings
Crossover gain settings
Crossover filter polarity settings
Slope Settings (Low Frequency)
Same items as for high frequency
Crossover settings
(Only when Crossover function is enabled) (p. 43)
Same items as for Output 1
Filter 1 Settings (Type Selection)
Parametric equalizer
High-pass filter (6 dB/12 dB)
Low-pass filter (6 dB/12 dB)
High shelving filter
Low shelving filter
Horn equalizer
Notch filter
All-pass filter
Filter 6* Settings (Type Selection)
Same items as for Filter 1
Filter settings (p. 45)
Threshold Level Settings
Ratio settings
Attack time settings
Release time settings
Makeup gain settings
Compressor settings (p. 50)
(From the previous page)
(Only when Group is set)
3
Input 12 Gain Settings
Same items as for Input 1
* The number of filters to be displayed differs depending on crossover configuration settings. (Refer to p. 62.)