Filter
Top Products
74
Setting Range
1 – 8
ON, OFF
–∞, –70 dB to +10 dB (default setting for 0.0 dB), 0.5 dB steps
–∞, –50 dB, –40 dB, –30 dB, –20 dB, –10 dB, 0 dB
20.5. Adjustment Mode Settings
[Settings when the D-001T is used]
Setting Item
Input Channel Selection
Channel Control
Channel Gain
Ducker Attenuation Level
–12 dB to +12 dB (default setting for 0 dB) 1 dB step
ON, OFF
ON, OFF
01 – 10
–12 dB to +12 dB (default setting for 0 dB) 1 dB step
0.3, 0.5, 0.7, 1, 1.5, 2, 3, 5
20, 25, 31.5
, 40, 50, 63, 80, 100, 125, 160, 200, 250, 315, 400, 500,
630, 800, 1 k, 1.25 k, 1.6 k, 2 k, 2.5 k, 3.15 k, 4 k, 5 k, 6.3 k, 8 k,
10 k, 12.5 k, 16 k, 20 kHz
OFF, 20, 25, 31.5, 40, 50, 63, 80, 100, 125, 160, 200, 250, 315, 400 Hz
OFF, 4 k, 5 k, 6.3 k, 8 k, 10 k, 12.5 k, 16 k, 20 kHz
OFF, 0, 1, 2, 3, 4, 5
–40, –35, –30
, –25, –20, –15, –10, –5 dB
BASS/TREBLE
Loudness Compensation
EQ
EQ Band Number
Gain
Q
Center Frequency
HPF
LPF
Compressor
VOX Sensitivity
Output Channel Settings
Input Channel Settings
1 – 2 (Max. 8 when the 3 T-001Ts are used)
ON, OFF
–∞, –70.0 dB to +10.0 dB, 0.5 dB steps (default setting for 0.0 dB
)
–12 dB to +12 dB (default setting for 0 dB) 1 dB step
ON, OFF
OFF, F-122, F-122SUBWFER (F-122 with a subwoofer),
H-1, H-1SUBWOOFER (H-1 with a subwoofer),
H-2, H-2SUBWOOFER (H-2 with a subwoofer),
H-3, H-3SUBWOOFER (H-3 with a subwoofer),
HB-1, FB-100, SW FOR F-122 (subwoofer for F-122),
SR-S4 SINGLE (SR-S4 driven by a single amplifier),
HX-5_E, HX-5_E LOCUT (HX-5_E for low-cut), FB-120
ON, OFF
1 to 10
–12 dB to +12 dB (default setting for 0 dB) 1 dB step
0.3, 0.5, 0.7, 1, 1.5, 2, 3, 5
20, 25, 31.5
, 40, 50, 63, 80, 100, 125, 160, 200, 250, 315, 400, 500,
630, 800, 1 k, 1.25 k, 1.6 k, 2 k, 2.5 k, 3.15 k, 4 k, 5 k, 6.3 k, 8 k,
10 k, 12.5 k, 16 k, 20 k
OFF, 20, 25, 31.5, 40, 50, 63, 80, 100, 125, 160, 200, 250, 315, 400 Hz
OFF, 4 k, 5 k, 6.3 k, 8 k, 10 k, 12.5 k, 16 k, 20 kHz
OFF
, 0, 1, 2, 3, 4, 5
Output Channel Selection
Channel Control
Channel Gain
BASS/TREBLE
Loudness Compensation
Speaker Parameter Presetting
Note
For each speaker EQ setting,
refer to the next page.
EQ
EQ Band Number
Gain
Q
Center Frequency
HPF
LPF
Compressor