Filter
Top Products
26
11.3.1. Audio input setting
The screen display examples shown below may differ from actual displays.
The on-screen indications shown in red here (actually shown by flashing cursors) are parameters or setting contents to be selected with the Parameter setting knob, input channel selection key or other designated keys.
Unless otherwise specified, the indications of the [ ], [ ], [ ], and [ ] arrows represent that the screen is switched with the Screen shift key.
UTILITYMEMORY
INPUT SELECT
1 – 8
I NPUT–SETT I N
G
Normal operation mode
Setting menu screen
SELECT INPUT CH
Input channel selection
PARAMETER
Ducker ON/OFF setting
IN1– _______
Input channel name setting (p. 33)
Priority setting
(p. 34)
Input channel name setting
IN1– DUCKER–
O
FF
Ducker ON/OFF setting (p. 34)
(For the channel on which the D-001T is used)
IN1– PHANT
O
M
–
O
N
Phantom power ON/OFF setting
IN1– SENSITIVITY– 10
Input sensitivity setting (p. 33)
IN1– V
O
X –
O
FF
VOX ON/OFF setting (p. 33)
(For the channel on which the ZP-001T is used)
PREPA
G
ET
O
NE–
O
FF
Pre-paging tone ON/OFF setting (p. 33)
Output format setting (p. 33)
Operation mode setting
(p. 33)
O
UT=
O
UTPU
T
S
E
LECT
M
O
DE
=
RIN
G
S
IG
NAL
Press for over 2 seconds.
IN1 PRI
O
RI
T
Y 8