Filter
Top Products
9
1 Introduction
About TreeFrog
®
Architecture
The Spectra 2K library uses TreeFrog architecture for robotic tape libraries developed
by Spectra Logic. TreeFrog architecture can be configured with 15 or 30 cartridge slots
and one or two tape drives. In addition, TreeFrog architecture supports SCSI-2
interfaces—both low-voltage differential/single-ended (LVD/SE) and differential. The
cornerstones of TreeFrog architecture are the integrated robotic picker and the
uni-body robotic chassis.
About This Guide
This guide is intended to be read by the owners of the Spectra 2K library. It covers the
installation and operation of the library, as well as troubleshooting information. For the
latest up-to-date information please go to www.spectralogic.com
, and view the latest
Spectra 2K Library User Guide. Also available are these related publications:
Related Publications
• Spectra 2K Library Release Notes provides last-minute information about the Spectra
2K library.
• Spectra 2K Library Developer Guide provides SCSI reference material and other
references useful to application developers.
Getting Started
If your library is already installed and configured, begin with Chapter 4 Using the
Library. To install and configure the library from the beginning, read all of the
chapters of this guide in sequence.