Filter
Top Products
Chapter 7. Maintenance, Troubleshooting, and Repairs
58
Caring for the Library
For a lifetime of reliable performance from your library, disconnect the power to the
library and perform an annual inspection of the internal components.
• Use compressed air to clean out the slots in the DCM(s).
• Use compressed air to clean out the inventory sensors on the robotic tape picker
(Figure 7-2).
• Use a soft cloth to clean the bar code scanner window on the robotic tape picker
(Figure 7-2).
• With power to the library disconnected, open the rear access panel and use
compressed air to clean out the area behind the drives.
Figure 7-2 Robotic tape picker (shown removed for clarity).
Picker jaws (rear)
Inventory sensors
Bar code reader
LED (front)