Filter
Top Products
64
US
You can set the system to turn off after a certain
time, so that you can fall asleep to music.
Press SLEEP repeatedly.
Each time you press the button, the minute
display (the turn-off time) changes cyclically as
follows:
90min t 80min t 70min t … t 10min t
OFF
Other operations
Note
When the Sleep Timer is activated, “SLEEP” lights up
in the display.
Tip
You can use the Sleep Timer even if you have not set
the clock.
You can wake up to music at a preset time. Make
sure you have set the clock (see “Setting the
clock” on page 13).
1 Prepare the music source you want to
playback.
• Disc: Load a disc.
• Tape: Load a tape with the side you want
to play back facing forward.
• Radio: Tune in the preset station you
want (see “Listening to the radio” on
page 49).
2 Press VOLUME +/– (or turn MASTER
VOLUME on the unit) to adjust the
volume.
3 Press TIMER MENU.
4 Press V or v repeatedly to select
“PLAY SET?”, then press ENTER.
“ON” appears and the hour indication
flashes in the display.
5 Set the time to start playback.
Press V or v repeatedly to set the hour,
then press ENTER.
The minute indication flashes in the
display.
Press
V or v repeatedly to set the minute,
then press ENTER.
“OFF” appears and the hour indication
flashes in the display.
6 Set the time to stop playback following
the same procedure as step 5.
7 Press V or v repeatedly until the
music source you want appears in the
display.
Each time you press the button, the display
changes as follows:
8 Press ENTER.
The type of timer (“PLAY TIMER”),
followed by the start time, the stop time and
the music source appears in the display in
sequence before the original display
returns.
9 Press ?/1 to turn off the system.
Timer
Falling asleep to music
— Sleep Timer
To Do this
Check the
remaining time
Press SLEEP once.
Change the time
to turn off
Press SLEEP repeatedly to select
the time you want.
Cancel the Sleep
Timer
Press SLEEP repeatedly until
“SLEEP OFF” appears in the
display.
Waking up to music
—Play Timer
t
TUNER
y
DVD PLAY
T
t
TAPE PLAY
T