Filter
Top Products
Sound Adjustment
63
US
4 Press ENTER.
5 Press SCORE before singing a song in
Karaoke Mode.
The previous highest score appears on the
TV screen.
6 After singing for more than a minute,
press SCORE again to view your score.
Your score is calculated from a scale of
0 to 99.
Tip
The “SCORE MODE” setting is automatically
changed to “NORMAL” when the system is turned off.
Notes
• The highest score is reset when the system is turned
off.
• The score calculating function may be canceled
when certain remote buttons are pressed.
• In some cases, you may not be able to use the scoring
mode.
You can “mix” sounds from any one of the
function and singing or speaking into a
microphone.
The mixed sound can be recorded onto a tape.
Use the buttons on the unit for the operation.
1 Turn MIC 1 LEVEL or MIC 2 LEVEL to
“MIN” to turn down the microphone
volume.
2 Connect an optional microphone to
MIC 1 or MIC 2 jack.
3 Prepare the music source you want to
mix. Then, insert a recordable tape into
Deck B.
4 Press the function button of the source
you want to record (e.g., DVD).
If you want to record from TAPE A, press
TAPE A/B repeatedly to select “TAPE A”.
5 Press REC PAUSE/START.
“REC” flashes in the display. Deck B stands
by for recording.
6 Press DIRECTION repeatedly to select
“g” to record on one side. Select
“j” (or “RELAY”) to record on both
sides.
7 Press REC PAUSE/START.
“REC” lights up in the display.
Recording starts.
8 Start playing the source to be
recorded.
Start singing along with the music.
9 Adjust the microphone volume by
turning MIC 1 LEVEL or MIC 2 LEVEL.
To stop recording
Press x.
After you have finished
Turn MIC 1 LEVEL or MIC 2 LEVEL to
“MIN” and disconnect the microphone from
MIC 1 or MIC 2 jack.
Note
During DVD function, the Karaoke Mode is
automatically turned on when you connect an optional
microphone to MIC 1 or MIC 2 jack.
Tips
• When recording from the reverse side:
After step 3, press TAPE A/B repeatedly to select
“TAPE B”. Press nN repeatedly until the
TAPE B reverse side indicator lights up to start
playback of the reverse side. Press x at the point you
want to start recording.
• When recording on both sides:
Be sure to start from the front side. If you start from
the reverse side, recording stops at the end of the
reverse side.
• If acoustic feedback (howling) occurs, move the
microphone away from the speakers or change the
direction of the microphone.
• If you want to record your voice through the
microphone only, you can do so by selecting the
TAPE A function and not playing any tape.
• When high level sound signals are input, the system
automatically adjust the recording level to prevent
distortion of the recorded sound signals (Auto Level
Control Function).
Mixing and recording
sounds