Filter
Top Products
46
US
x LEVEL (FRONT)
You can adjust the level of the front speakers,
center speaker and subwoofer as follows. Be
sure to set “TEST TONE” to “ON” for easy
adjustment. The items that are set to “NONE” in
“SIZE” cannot be selected.
Depending on the sub woofer, the sound output
may be smaller compared to other speakers
when you adjust the “SUBWOOFER” setting
during test tone.
x LEVEL (SURROUND)
You can adjust the level of each surround
speakers as follows. Be sure to set “TEST
TONE” to “ON” for easy adjustment.
This setting cannot be selected when
“SURROUND” is set to “NONE” in the “SIZE”
setting.
Tip
To adjust the volume of all speakers at the same time,
press VOLUME +/– repeatedly (or turn MASTER
VOLUME on the unit).
x TEST TONE
The speakers will emit a test tone to adjust
“LEVEL (FRONT)” and “LEVEL
(SURROUND)”.
Adjusting the speaker level by
using the test tone
1 Press DISPLAY when playback is
stopped.
The Control Menu appears on the TV
screen.
2 Press V or v repeatedly to select
(SETUP), then press ENTER.
The options for “SETUP” appear on the TV
screen.
3 Press V or v repeatedly to select
“CUSTOM”, then press ENTER.
The Setup menu appears on the TV screen.
4 Press V or v repeatedly to select
“SPEAKER SETUP”, then press
ENTER.
5 Press V or v repeatedly to select
“TEST TONE”, then press ENTER.
6 Press V or v repeatedly to select
“ON”, then press ENTER.
For FST-ZX100D, LBT-ZX100D and
MHC-GN1000D, you will hear the test tone
from each speaker in sequence.
For FST-ZX80D and LBT-ZX80D, you
will hear the test tone from each speaker in
sequence except for subwoofer.
7 Press V or v repeatedly to select
“LEVEL (FRONT)”, then press ENTER.
8 Press V or v repeatedly to select the
speaker, then press ENTER.
The test tone is emitted from the selected
speaker.
L
0.0 dB
Set this between –6.0 dB and 0.0 dB
in 1.0 dB increments.
R
0.0 dB
Set this between –6.0 dB and 0.0 dB
in 1.0 dB increments.
CENTER
0.0 dB
Set this between –6.0 dB and
+6.0 dB in 1.0 dB increments.
SUBWOOFER
0.0 dB
Set this between –6.0 dB and
+6.0 dB in 1.0 dB increments
(FST-ZX100D/LBT-ZX100D/
MHC-GN1000D only).
Set this between –10.0 dB and
+10.0 dB in 1.0 dB increments
(FST-ZX80D/LBT-ZX80D only).
L
0.0 dB
Set this between –6.0 dB and
+6.0 dB in 1.0 dB increments.
R
0.0 dB
Set this between –6.0 dB and
+6.0 dB in 1.0 dB increments.
OFF
The test tone is not emitted from the
speakers.
ON
The test tone is emitted from each speaker
in sequence (FST-ZX100D/LBT-ZX100D/
MHC-GN1000D only).
The test tone is emitted from each speaker
in sequence except for subwoofer
(FST-ZX80D/LBT-ZX80D only).
The test tone is emitted from the selected
speakers when you select “LEVEL
(FRONT)” or “LEVEL (SURROUND)”.