Filter
Top Products
10
US
3 Connect the center speaker.
Connect the speaker cord of the center
speaker to the CENTER SPEAKER
terminal as shown below.
4 Connect the subwoofer.
(FST-ZX100D/LBT-ZX100D/
MHC-GN1000D only)
Connect the subwoofer cord to the
SUBWOOFER OUT terminal and the
system cord to the SYSTEM CONTROL
jack as shown below.
SUBWOOFER OUT terminal
SYSTEM CONTROL jack
5 Connect the video input jack of your
TV to the VIDEO OUT jack with the
supplied video cord.
When using a TV
Turn on the TV and select the video input so that
you can view the pictures from this system.
When connecting a video deck
Connect the video deck to the TV using a video
cord (not supplied). However, do not connect
this unit to the TV through the video deck.
Otherwise, you may experience video leakage
when watching video images from this system.
Connect this unit directly to the TV as shown
below.
Tip
For higher quality video images:
– Use the optional component video cords to connect
the COMPONENT VIDEO input jacks on your TV
to the COMPONENT VIDEO OUT jacks of this
unit. If your TV is compatible with progressive
format file signals, use this connection and press
PROGRESSIVE on the unit repeatedly until
“P AUTO” or “P VIDEO” appears in the display
(page 16).
– You can use an optional S Video cord to connect the
S VIDEO input jack on your TV to the S VIDEO
OUT jack of this unit.
6 Connect the FM and AM antennas.
Set up the AM loop antenna, then connect
it.
Green
Purple
SYSTEM
CONTROL
S VIDEO
OUT
VIDEO
OUT
COMPONENT
VIDEO OUT
Y
P
B
/
C
B
P
R
/
C
R
Do not connect
directly
TV
Unit
Video deck
Extend the FM lead
antenna horizontally
AM loop antenna