Filter
Top Products
Tuner
49
US
Note
You cannot change the AM tuning interval in Power
Saving Mode (page 66).
Tips
• The preset stations are retained for half a day even if
you unplug the power cord or if a power failure
occurs.
• If you press TUNER/BAND on the unit while the
system is turned off, the system turns on
automatically and “TUNER” is selected as the
function except during Power Saving Mode.
You can listen to a radio station either by
selecting a preset station, or by manually tuning
in the station.
Listening to a preset radio
station
— Preset Tuning
Before tuning to preset stations, be sure to preset
them first (see “Presetting radio stations” on
page 47).
1 Press FUNCTION +/– repeatedly to
select “TUNER FM” or “TUNER AM”
(or press TUNER/BAND on the unit
repeatedly to select “FM” or “AM”).
2 Press PRESET +/– repeatedly to select
the preset station you want.
Listening to a non-preset
radio station
— Manual Tuning
1 Press FUNCTION +/– repeatedly to
select “TUNER FM” or “TUNER AM”
(or press TUNER/BAND on the unit
repeatedly to select “FM” or “AM”).
2 Press TUNING +/– repeatedly to tune in
the station you want.
Tips
• For Preset Tuning, you can use the numeric buttons
to select a preset station. Press the numeric button(s)
to enter the preset number and then press ENTER.
• To improve broadcast reception, adjust the supplied
antennas, or connect an external antenna.
• When an FM stereo program has static noise, press
FM MODE repeatedly until “MONO” lights up in
the display. There will be no stereo effect, but the
reception will improve.
• To record the radio programs, see “Recording onto a
tape manually” (page 51) or “Timer recording radio
programs” (page 65).
Listening to the radio
FrequencyPreset number