Filter
Top Products
50
US
1 Push b (Z A) or B (B Z) on the unit
according to its direction to open the
selected deck.
2 Load a tape into Deck A or B.
3 Push the center of the tape lid to close
the deck.
You can use TYPE I (normal) tape.
1 Load a tape.
2 Press FUNCTION +/– (or TAPE A/B on
the unit) repeatedly to select “TAPE A”
or “TAPE B”.
3 Press DIRECTION on the unit
repeatedly to select “g” to play back
one side, “j”
1)
to play back both
sides or “RELAY”
2)
(Relay Play) to play
back both decks in succession.
4 Press H (or nN on the unit).
The tape starts playing.
Press H (or nN on the unit) again to
play back the reverse side.
1)
The playback stops automatically after
repeating the sequence five times.
2)
Relay Play follows this cyclic sequence up to
five times, then stops:
Deck A (front side) t Deck A (reverse side)
t Deck B (front side) t Deck B (reverse
side)
Other operations
Note
Do not push b (Z A) or B (B Z) on the unit while
playing a tape, otherwise the tape could be damaged.
Tips
• When a tape is inserted, the corresponding presence
indicator lights up in the display.
• If you press TAPE A/B on the unit while the system
is turned off, the system turns on automatically and
“TAPE A” or “TAPE B” is selected as the function
except during Power Saving Mode.
• If you press H (or nN on the unit) when the
TAPE A function is selected and there is no tape in
Deck A, the system automatically switches to the
TAPE B function when there is a tape in Deck B and
vice versa. Then, playback will start.
Tape – Playback
Loading a tape
Playing a tape
t
A
b
Push here
to eject the
tape deck
With the side
you want to
play back or
record facing
forward
To Do this
Stop playback Press x.
Pause playback Press X. Press X again to resume
playback.
Fast-forward or
rewind
Press m or M (or m or
M on the unit). To return to
normal playback, press H
(or nN on the unit).
Remove a tape Push b (Z A) or B (B Z) on the
unit according to its direction
when playback is stopped.
Tape presence indicator
Front side
indicator
Reverse
side
indicator