Sony TA-VA777ES Stereo Amplifier User Manual


 
47
GB
Other Operations
Presetting Equalizer and Sound Fields
Any changes you make to the preset equalizers (EQ
PRESET 1~5) are stored automatically.
Presetting Equalizer Settings
1 Press EQ BANK repeatedly to select the equalizer
you want to adjust (EQ PRESET 1~5).
2 Press EQ.
3 Press the cursor buttons ( or ) to select the
desired parameter, then turn the jog dial to adjust.
These parameters let you adjust the sound of each
speaker individually (see page 37).
The adjustments are stored automatically.
z
You can turn off the equalization without erasing the
equalizer
Press the EQ BANK repeatedly to select “EQ PRESET OFF”.
Clearing Stored Equalizer Settings
1 Press EQ BANK repeatedly to select the equalizer
you want to clear (EQ PRESET 1-5).
2 Press EQ.
3 Press the cursor buttons ( or ) to display
“<PRESET x CLEAR [NO]>” (“x” is the number of the
current equalizer preset).
4 Turn the jog dial to display “<PRESET x CLEAR
[YES]>” and press ENTER.
“Are you sure? [NO]” is displayed.
5 Once again, turn the jog dial to display “[YES]” and
press ENTER.
“PRESET x CLEARED !” is displayed and the contents
of the selected equalizer bank are restored to the
factory presets.
Presetting Sound Fields
You can preset up to 5 of your favorite sound fields and
easily call them up when you want.
1 Press MODE +/– repeatedly to select the sound
field to preset.
2 Press MEMORY.
3 Press SOUND FIELD PRESET 1-5 to select the preset
number.
The sound field is stored in memory.