Filter
Top Products
23
GB
Location of Parts and Basic Operations
1
2
4
5
3
PHONES
SPEAKERS
A
OFF
A+ B
B
MEMORY A.F.D 2 CH ANALOG DIRECT EQ BANK 5.1CH INPUT
– +
SOUND FIELD
0
10
MULTI CHANNEL DECODING
OPEN/
CLOSE
INPUT
SELECTOR
MASTER VOLUME
1
9
8
7
2
3
6
5
4
AUDIO SPLIT DIGITAL / ANALOG
1 /u
+
ENTER
EQ SUR LEVEL
NAME CUSTOM SET UP
VIDEOS-VIDEO
L AUDIO R
–
4 5
SOUND FIELD PRESET
321
MODE
3 AUDIO SPLIT button
Press to select and play another audio source in
combination with the selected component.
1 Rotate INPUT SELECTOR to select a video component.
2 Press AUDIO SPLIT repeatedly to select a different audio
source or press AUDIO SPLIT once to display the current
settings and turn the jog dial to select the different audio
source. The display switches to “V:XXX A:XXX” to show
both the video (V:XXX) and audio (A:XXX) sources.
To cancel AUDIO SPLIT
Press and hold AUDIO SPLIT for at least two seconds.
Note
When using AUDIO SPLIT, the input (digital/analog) of the
selected audio source is automatically set to “AUTO” (see
“4 DIGITAL/ANALOG button” for details).
4 DIGITAL/ANALOG button
Press to select either digital or analog audio signals for
your digital components (DVD, TV/LD, CD and MD/
DAT).
Each press switches the input of the currently selected
component as follows :
Select To
AUTO Give priority to digital signals
when there are both digital and
analog connections. If there are
no digital signals, analog is
selected.
ANALOG Specify the analog audio signals
input to the AUDIO IN (L and R)
jacks.
DIGITAL (OPTICAL) Specify the digital audio signals
input to the DIGITAL OPTICAL
IN jacks.
DIGITAL (COAXIAL) Specify the digital audio signals
input to the DIGITAL COAXIAL
IN jack. (CD and DVD only)
5 5.1CH INPUT button
Press to enjoy the audio source connected to the 5.1CH
INPUT jacks. Press again to return to the previous
function. When you want to listen to 5.1 channel audio
with another function, select the function first, and
then press 5.1CH INPUT.
• When 5.1CH INPUT is selected, the equalizer, bass booster,
and sound field effects do not function.
• When 5.1CH INPUT is selected, sound is output from all of
the speakers even if the center and rear speakers are set to
“NO” in the SP SETUP menu.