Filter
Top Products
20
GB
Hooking Up and Setting Up the Speaker System
PHONES
SPEAKERS
A
OFF
A+B
B
MEMORY A.F.D
0
10
MULTI CHANNEL DECODING
OPEN/
CLOSE
MASTER VOLUME
1
9
8
7
2
3
6
5
4
AUDIO SPLIT DIGITAL / ANALOG
1/u
+
ENTER
EQ SUR LEVEL
NAME CUSTOM SET UP
VIDEOS-VIDEO
L AUDIO R
MASTER VOLUME
INPUT SELECTOR
1/u
–
4 5321
2 CH EQ BANK 5.1CH INPUT
–
+
SOUND FIELD
INPUT
SELECTOR
SOUND FIELD PRESET
MODE
ANALOG DIRECT
Before turning on the amplifier
Make sure that you have:
• Turned MASTER VOLUME to the leftmost position (0).
• Selected the appropriate front speakers (see “@¢
SPEAKERS selector” on page 25).
Checking the connections
After connecting all of your components to the amplifier,
do the following to verify that the connections were made
correctly.
1 Press 1/u to turn on the amplifier.
2 Rotate INPUT SELECTOR to select a component
(program source) that you connected (e.g., CD
player or tape deck).
3 Turn on the component and start playing it.
4 Rotate MASTER VOLUME to turn up the volume.
If you do not obtain normal sound output after
performing this procedure, look for the reason in the
checklist on the following page and take the appropriate
measures to correct the problem.
Notes
• The rear balance, center level, and rear level are shown in the
display during adjustment.
• Although these adjustments can also be made via the front
panel using the parameters in the LEVEL menu (when the test
tone is output, the unit switches to the LEVEL menu
automatically), we recommend you follow the procedure
described above and adjust the speaker levels from your
listening position using the remote control.
Before You Use Your
Amplifier
Multi Channel Surround Setup