Sony TA-VA777ES Stereo Amplifier User Manual


 
21
GB
Hooking Up and Setting Up the Speaker System
There is no sound no matter which component is
selected.
/ Check that both the amplifier and all components
are turned on.
/ Check that the MASTER VOLUME control is not
set at 0.
/ Check that the SPEAKERS selector is not set to
OFF or to a position for front speakers that are not
connected to the amplifier (see “ SPEAKERS
selector” on page 25).
/ Check that all speaker cords are connected
correctly.
/ If “MUTING [ON]” appears in the display, press
MUTING on the remote to turn off the muting
function.
There’s no sound from a specific component.
/ Check that the component is connected correctly to
the audio input jacks for that component.
/ Check that the cord(s) used for the connection is
(are) fully inserted into the jacks on both the
amplifier and the component.
No sound is heard from one of the front
speakers.
/ Connect a pair of headphones to the PHONES jack
and set the SPEAKERS selector to OFF to verify
that sound is output from the headphones (see “
SPEAKERS selector” and “PHONES jack” on page
25).
If only one channel is output from the headphones,
the component may not be connected to the
amplifier correctly. Check that all the cords are
fully inserted into the jacks on both the amplifier
and the component.
If both channels are output from the headphones,
the front speaker may not be connected to the
amplifier correctly. Check the connection of the
front speaker which is not outputting any sound.
If you encounter a problem that is not included above, see
“Troubleshooting” on page 51.