Filter
Top Products
80
Specifications (continued)
Outputs
TAPE, MD/DAT
(REC OUT), VIDEO
1, 2 (AUDIO OUT)
FRONT L/R,
CENTER,
SURROUND L/R,
SURROUND BACK,
SUB WOOFER
EQ
BASS: 99 Hz~1.0 kHz
(21 steps)
MID (FRONT L/R, CENTER only):
198 Hz~10 kHz
(36 steps)
TREBLE: 1.0 kHz~10 kHz
(23 steps)
Gain levels: ±10 dB, 1 dB step
FM tuner section
Tuning range 87.5 – 108.0 MHz
Antenna terminals 75 ohms, unbalanced
Sensitivity
Mono: 18.3 dBf, 2.2 µV/75 ohms
Stereo:
38.3 dBf, 22.5 µV/75 ohms
Usable sensitivity 11.2 dBf, 1 µV/75 ohms
S/N
Mono: 76 dB
Stereo: 70 dB
Harmonic distortion at 1 kHz
Mono: 0.3%
Stereo: 0.5%
Separation 45 dB at 1 kHz
Frequency response 30 Hz – 15 kHz,
+0.5/–2 dB
Selectivity 60 dB at 400 kHz
1) Measured under the following conditions:
Area code Power requirements
E 240 V AC, 50 Hz
CN, CEL 230 V AC, 50 Hz
2) Measured under the following conditions:
Area code Power requirements
CN 220 V AC, 50 Hz
3) Depending on the sound field settings and the
source, there may be no sound output.
Frequency response
PHONO
CD/SACD, TAPE,
MD/DAT, TV/SAT,
DVD/LD, VIDEO 1, 2,
3
Inputs (Analog)
PHONO
MULTI CHANNEL
INPUT 1, 2, CD/
SACD, TAPE, MD/
DAT, DVD/LD, TV/
SAT, VIDEO 1, 2, 3
4) INPUT SHORT.
5) Weighted network, input level.
Inputs (Digital)
CD/SACD, DVD/LD
(Coaxial)
DVD/LD, TV/SAT,
MD/DAT (Optical)
Sensitivity: –
Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
Sensitivity: –
Impedance: –
S/N: 100 dB
(A, 20 kHz LPF)
RIAA equalization curve
±0.5 dB
10 Hz – 100 kHz
+0.5/–2 dB (with sound
field, equalizer, and bass
boost bypassed)
Sensitivity: 2.5 mV
Impedance: 50 kilohms
S/N
4)
: 86 dB (A, 2.5 mV
5)
)
Sensitivity: 150 mV
Impedance: 50 kilohms
S/N
4)
: 100 dB
(A, 150 mV
5)
)
Voltage: 150 mV
Impedance: 22 kilohms
Voltage: 2 V
Impedance: 1 kilohms