Filter
Top Products
74
Using the lists (continued)
Using the auto power function
With the auto power function turned on, the
commander sends numerous codes to the
appropriate Sony AV components when you
select a video function. Automatically, the
components and the TV you have done IR
setting turn on and the TV switches to the
selected input mode. This function works for
Sony components only.
1 Press SET UP.
The set up list appears.
LEARNING
DOWNLOAD
MENU SORT
pAUTO POWER
2 Move the easy scroll key to select
“AUTO POWER”, then press the key to
enter the selection.
The AUTO POWER list appears.
<AUTO POWER>
pOn
Off
3 Move the easy scroll key to select “On”
or “Off”, then press the key to enter the
selection.
When you select “On”, the TV INPUT list
appears.
<TV INPUT>
pTV-VIDEO1
TV-VIDEO2
TV-VIDEO3
4 Move the easy scroll key to select the
video input of the TV, then press the
key to enter the selection.
Notes
• Switching to VIDEO 1–4 input may not be
automatic on all Sony TVs. This is because some
TVs cannot receive remote control codes
immediately after being turned on.
• When you select “(Off)” in step 4, the TV input
does not switch.
Turning the backlight on or off
Each time you press a button on the remote, the
backlight turns on. If you do the procedure
below to turn off the backlight, you can make
the batteries last longer.
1 Press SET UP.
The set up list appears.
DOWNLOAD
MENU SORT
AUTO POWER
pBACK LIGHT
2 Move the easy scroll key to select
“BACK LIGHT”, then press the key to
enter the selection.
The BACK LIGHT list appears .
<BACK LIGHT>
pOn
Off
3 Move the easy scroll key to select “On”
or “Off”, then press the key to enter the
selection.
Adjusting the contrast of the display
You can adjust the contrast of the display.
1 Press SET UP.
The set up list appears.
MENU SORT
AUTO POWER
BACK LIGHT
pCONTRAST
2 Move the easy scroll key to select
“CONTRAST”, then press the key to
enter the selection.
<CONTRAST>
p+
-
3 Move the easy scroll key to select “+”
or “–”, then press the key to enter the
selection.
Each time you press the key, the contrast of
the display changes. To cancel adjusting,
move the easy scroll key to select “Exit”,
then press the key to enter the selection.