Filter
Top Products
71
Operations using the remote
To enter a name for SUB 1–5
1 In step 5, move the easy scroll key to select
“Name”, then press the key to enter selection.
2 Use the easy scroll key to create a name (up to
8 characters).
+/–: select a character
</>: move the cursor
Insert: insert a space
Delete: delete a character
To cancel learning
Move the easy scroll key to select “Exit” or
“Cancel” during any step, then press the key to
enter the selection.
To erase the learned code
In step 5 above, move the easy scroll key to
select “Clear”, then press the key to enter the
selection. Again, move the easy scroll key to
select “Yes”, then press the key to enter the
selection. The number of buttons and the
capacity used for learning are displayed.
Tips
• The marks that are displayed in front of the button
name indicate the following:
x : already learned
* : pre-programmed
• In step 3, learned buttons can be selected directly. If
you press the button you want to use for the
Learned function, the list will jump to the same
button.
• The Learned function can be applied to the SUB
menus. SUB 1–5 can be learned.
Notes
• You can program up to 80 buttons for the Learned
function. However, in some cases, you may not be
able to program even if you have not programmed
80 buttons.
• If you select “IR SET” for a component that already
has a learned button setting, the learned codes for
that component are cleared. Furthermore, if the
cleared learned button is used in a Macro Play
setting, the setting for that button will be changed to
“NO SET”.
Using a command that has been
learned
When selecting a learned function, press the
button used to learn that function.
Downloading data from the
Receiver
The remote communicates with the receiver
every time a button is pressed on the remote
and displays the current operation status of the
receiver on the display window. The remote
can also download index names of the program
sources, preset stations, CD disc names
(memos)*, and information indicating the
presence or absence of a CD in each slot of a
CD changer* from the receiver.
* Appears only when you have selected a Sony CD
changer (5, 50, 200, 300, or 400 discs) connected to
the receiver using the CONTROL A1 cable.
Be sure to turn on the receiver and point
the remote towards the receiver when
performing the following procedure.
1 Press SET UP.
The set up list appears.
2 Move the easy scroll key to select
“DOWNLOAD”, then press the key to
enter the selection.
The DOWNLOAD list appears.
<DOWNLOAD>
pFUNCTION
SOUND FIELD
TUNER INFO
3 To download index names
Move the easy scroll key to select
“FUNCTION”, then press the key to enter
the selection.
To download sound field names
Move the easy scroll key to select “SOUND
FIELD”, then press the key to enter the
selection.
To download preset stations
Move the easy scroll key to select “TUNER
INFO”, then press the key to enter the
selection.
continued