Filter
Top Products
63
Operations using the remote
a) “SIDE A/B” appears for non-Sony LD players.
b) Only with Sony TVs with the picture-in-picture
function.
c) Only with Sony TVs that supports the wide-picture
mode.
d) Only with the Sony CD changer.
Note
If you have programmed the remote to control non-
Sony components, note the following:
– All the items may not appear when you select a
component.
– All the items displayed may not function.
Tip
Do the following procedure to perform title and set up
menu operations on the DVD player.
1Select the DVD player from the function list.
2Press SUB.
3Move the easy scroll key to select “TITLE” (for the
title menu) or “SET UP” (for the set up menu), then
press the key to enter the selection.
4Open up the cover on the remote and move the easy
scroll key to select “DVD” from the CURSOR
TYPE list, then press the key to enter the selection.
5Use the cursor buttons and the ENTER/EXECUTE
button to perform menu operations on the DVD
player.
To exit the menu operation, press SUB, move the
easy scroll key to select “TITLE” or “SET UP”, then
press the key to enter the selection.
To display the DVD menu, use the AV MENU
button. For details, see “wd AV MENU button” on
page 59.
Tip
You can freely assign codes to SUB1 through SUB5.
Select when you transmit learned codes. For details,
see “Learning the commands of your components” on
page 70.