Filter
Top Products
79
Additional Information
Remote control
The remote does not function.
• Point the remote at the remote sensor on
the receiver.
• Remove any obstacles in the path between the
remote and the receiver.
• Replace all the batteries in the remote with new
ones, if they are weak.
• If the receiver’s COMMAND MODE and the
remote’s COMMAND MODE do not match,
transmission is not possible between the remote
and the receiver.
• Make sure you select the correct function on the
remote.
• When you operate a programmed non-Sony
component, the remote may not function
properly depending on the model and the make
of the component.
The component names appearing in the function
list do not correspond to the jacks on the
receiver./The sound field list does not appear.
• The remote has not been initialized. Turn on the
receiver, point the remote at the receiver, and
press SOUND FIELD, FUNCTION, or SUB on
the remote (see page 56).
E appears in the display window of the remote.
• The batteries are running out. Replace all the
batteries with new ones.
The function names that appear in the display
windows of the receiver and the remote are
different.
• Select the correct function using the remote.
When the CD player, tape deck, or MD deck is
connected to the receiver via CONTROL A1/A1
jacks, Auto Function does not work properly.
• Reprogram the remote (see page 66).
Reference sections for clearing the
memory
To clear See
All memorized settings page 18
Customized sound fields page 41
All the settings in the remote page 75
Specifications
Amplifier section
Models of area code E:
Rated Power Output at Stereo Mode
(8 ohms 20 Hz – 20 kHz, THD 0.05 %)
100 W + 100 W
1)
(4 ohms 20 Hz – 20 kHz, THD 0.09 %)
90 W + 90 W
1)
Reference Power Output
(8 ohms 20 Hz – 20 kHz, THD 0.05 %)
FRONT
3)
: 100 W + 100 W
CENTER
3)
: 100 W
SURR
3)
: 100 W + 100 W
SURR BACK
3)
: 100 W
(4 ohms 20 Hz – 20 kHz, THD 0.09 %)
FRONT
3)
: 90 W + 90 W
CENTER
3)
: 90 W
SURR
3)
: 90 W + 90 W
SURR BACK
3)
: 90 W
Models of area code CN, CEL:
Rated Power Output at Stereo Mode
(8 ohms 1 kHz, THD 0.7 %)
100 W + 100 W
1)
90 W + 90 W
2)
(4 ohms 1 kHz, THD 0.7 %)
90 W + 90 W
1)
80 W + 80 W
2)
Reference Power Output
1)
(8 ohms 1 kHz, THD 0.7 %)
FRONT
3)
: 100 W + 100 W
CENTER
3)
: 100 W
SURR
3)
: 100 W + 100 W
SURR BACK
3)
: 100 W
(4 ohms 1 kHz, THD 0.7 %)
FRONT
3)
: 90 W + 90 W
CENTER
3)
: 90 W
SURR
3)
: 90 W + 90 W
SURR BACK
3)
: 90 W
(8 ohms 20 Hz – 20 kHz, THD 0.05 %)
FRONT
3)
: 90 W + 90 W
CENTER
3)
: 90 W
SURR
3)
: 90 W + 90 W
SURR BACK
3)
: 90 W
(4 ohms 20 Hz – 20 kHz, THD 0.05 %)
FRONT
3)
: 80 W + 80 W
CENTER
3)
: 80 W
SURR
3)
: 80 W + 80 W
SURR BACK
3)
: 80 W
continued