Filter
Top Products
Basic Operations
6
Basic Operations
Playing a CD
PHONE LEVEL
PHONES
MIN MAX
MENU/ NO
YES
CLEAR
PUSH ENTER
REC
AMS
EJECT
MD LP
REC MODE
MD
PLAY MODE
PLAY MODE
TIME
DISPLAY
SLEEP
TIME/CHAR INPUT
DISC 1
NORMAL
CD SYNCHRO
HIGH
CLEAR
PUSH ENTER
AMS
REC-IT
STANDBY
DISC 2 DISC 3 DISC 4 DISC 5
CD
2
3
4
3
1
Turn on the amplifier and set the source selector to the position
for this deck.
2
Press 1/u.
The STANDBY indicator turns off.
3
Press any DISC 1 – 5 § and place a CD on the disc tray. Press
the button again to close the CD tray.
When you play an 8-cm CD, place it on the inner circle of the
tray.
With the label side up
4
Press ·.
The deck starts playing. Adjust the volume on the amplifier.
To Do the following:
Connect the headphones.
Adjust the headphone volume.
When using the controls on the
deck
Use the CD player controls located
to the left of the front panel.
When using the remote Z
Set SELECT to CD.
Audio output
Output switches automatically to
the audio of the CD.
z You can start playing with
the track selected in Step 4
1 Turn AMS (or press = or
+) to select the track you
want to play using the
display*.
2 Press AMS or ·.
* See “Using the Display” on
page 12.
z You can remove and load
CDs while playing another
CD
Press any DISC 1 – 5 § other
than the CD that is currently
playing to open that tray, and
remove or load the CD.
Stop playing Press p.
Pause playing Press P. Press the button again or press · to
resume playing.
Go to the next track Turn AMS clockwise (or press + on the
remote).
Go to the beginning of the
current track or the
preceding track
Turn AMS counterclockwise (or press = on the
remote).
Take out the CD Press one of DISC 1 – 5 § to open the tray that
contains the CD you want to remove after
stopping playing.