Filter
Top Products
Playing CDs and MDs
14
Number buttons
Locating a Specific Track
You can quickly locate any track while playing a disc
by using the AMS (Automatic Music Sensor) control on
the deck, = and + buttons on the remote, or
number buttons on the remote.
When using the remote, set SELECT to CD or MD.
·
AMS ·
1 / u
><
^
^
SELECT
=/+
To locate Do the following:
z To pause playing at the beginning of a track
Turn AMS (or press = or +) after pausing
playback.
z To go quickly to the beginning of the last track
Turn AMS counterclockwise (or press =) while the
display shows the total track number, total disc playing
time or remaining recordable time of the disc
(recordable MD only), or disc name (see page 13).
The next or succeeding
tracks
During playback, turn AMS clockwise
(or press + repeatedly) until you
find the track.
The beginning of the
current or preceding
tracks
During playback, turn AMS
counterclockwise (or press =
repeatedly) until you find the track.
A specific track
directly Z
Press number button(s) to enter the
track number.
A specific track by
using AMS
1 While the deck is stopped, turn
AMS until the track number you
want to locate appears.
2 Press AMS or ·.
z When you directly locate a track with a number over
10 Z
Press >10 before entering the corresponding digits.
Press >10 once if it is a 2-digit track number, and twice
if it is a 3-digit track number (for MD only).
To enter “0”, press button 10/0.
Examples: •To play track number 30
Press >10 once, then 3 and 10/0.
•To play track number 100
Press >10 twice, then 1, 10/0 and 10/0.