Filter
Top Products
Additional Information
42
Display Messages
The following table explains the various messages that
appear in the display. Also, the deck has a Self-
Diagnosis Function (see page 51).
Message Meaning
Blank Disc A new (blank) or erased MD has been
inserted.
Cannot Copy An attempt was made to make a second
copy from a digitally dubbed MD (see
page 46).
Cannot Edit An attempt was made to edit the MD
during Program or Shuffle Play or to
change the recording level of an MD
recorded in LP2 or LP4 Stereo mode. Or
the MD is record-protected.
CD Error! An operational error has occurred in the
CD player section. Wait a few seconds,
and then try the operation again.
Disc Full! The MD is full (see “System Limitations”
on page 43).
Edit NOW You pressed 1/u while in S.F Edit
(changing the recording level after
recording, Fade-in, Fade-out) mode.
If you turn off the deck while in S.F Edit
mode, any changes that you have made
will not be made properly. Finish the
changes and leave S.F Edit mode before
turning off the deck.
Impossible The deck cannot do the specified editing
operation (see pages 30 and 32).
Incomplete! The S.F Edit (changing the recording level
after recording, Fade-in, Fade-out)
operation was not performed properly
because the deck was moved while
recording was in progress or the MD is
damaged or dirty.
Initialize (flashing
when you turn on
the deck)
This happens when the deck has been
disconnected from the AC power source
for certain period of time.
Name Full! The titling capacity of the MD has reached
its limit (about 1,700 characters).
No Change While attempting to change the recording
level after recording, you pressed AMS or
YES without actually changing the
recording level, so no change was made.
No Disc There is no MD or CD in the deck.
No Name The disc or track has not been labeled.
Premastered An attempt was made to record on the
premastered MD.
Message Meaning
–Retry– The deck is retrying reading data from the
CD (see page 11).
Step Full! The program contains the maximum
number of tracks. You cannot set
additional tracks.