Filter
Top Products
Additional Information
50
Table of Setup Menus
You can make various settings on this deck by using Setup Menus. Operation related to each menu were explained
in the previous sections. The table below outlines each menu, including the various parameters and initial settings.
Note
The menus you can use while the deck is stopped, playing or recording differ.
To enter the Setup Menu
While the deck is stopped, press MENU/NO twice to display “Setup Menu.”
Menu
Function Parameters Initial setting See
T.Mark Sets the Track Marking Function. LSyn/Off LSyn page 24
LS (T) Changes the trigger level for Track
Marking Function
–72 to 0dB –50dB page 25
S.Space Sets the Smart Space and Auto Cut
Functions.
On/Off On page 20
F.in Sets the fade-in time. 1.0s to 15.0s 5.0s page 27
F.out Sets the fade-out time. 1.0s to 15.0s 5.0s page 27
Pfine Fine controls the playing speed. –87.5 to 0.0% 0.0% page 18
Pitch
Changes the playing speed by auto
steps.
–36 to 0
0 page 18
CD Adjusts the input level from the CD
player section.
–∞dB to +12.0dB 0.0dB page 23
Opt Adjusts the input level from the
DIGITAL OPTICAL IN connector.
–∞dB to +12.0dB 0.0dB
page 23
Anlg Adjusts the input level from the
ANALOG IN jacks.
–∞dB to +12.0dB 0.0dB page 23
LPstamp Sets whether to automatically add
“LP:” at the beginning of a track name
during a long time recording.
On/Off On page 23
To reset to the initial setting
Press CLEAR while the respective Setup Menu is displayed.