Filter
Top Products
Basic Operations
10
Recording a CD to an MD at
High Speed
(High-Speed CD-MD Synchro-Recording)
1
Press 1/u.
The STANDBY indicator turns off.
2
Insert a recordable MD.
3
Press any DISC 1 – 5 § and place a CD on the disc tray. Press
the button again to close the CD tray.
4
Press PLAY MODE to select the playing mode of the CD
(normal play or Program Play).
5
Press CD SYNCHRO HIGH.
“CD SYNCHRO” appears and “–High–” flashes in the display.
The MD deck section stands by for recording and the CD
player section stands by for playing.
6
After “CD SYNCHRO” and “–High–” turn off, press · or P
on the right of the front panel.
High-speed recording starts. You cannot monitor the recorded
signal during recording. The MD deck section and the CD
player section will automatically stop after recording.
To stop recording
Press p.
PHONE LEVEL
PHONES
MIN MAX
MENU/ NO
YES
CLEAR
PUSH ENTER
REC
AMS
EJECT
MD LP
REC MODE
PLAY MODE
TIME
DISPLAY
DISC 1
NORMAL
CD SYNCHRO
HIGH
CLEAR
PUSH ENTER
AMS
REC-IT
STANDBY
DISC 2 DISC 3 DISC 4 DISC 5
CD
1
25
6
3
4
3
MD
PLAY MODE
SLEEP
TIME/CHAR INPUT
You can easily make digital
recordings from a CD to an MD
faster than normal CD-MD
Synchro-Recording, marking
track numbers in the same
sequence as the original CD.
Before recording, see “Notes on
Recording” on page 19.
z CD text is copied to the MD
automatically
When the CD to be recorded
using the High-Speed CD-MD
Synchro-Recording Function
contains track names, this
information is recorded onto
the MD automatically.
Note that CD text on some
CDs is copy-protected and
thus may not be copied to the
MD.
z You can play back tracks just
recorded
If “TRACK” lights up in the
display when recording has
finished, press ·
immediately to play back from
the first track of the material
just recorded.