Filter
Top Products
Operating the Deck Using a Keyboard
40
Operating the Deck Using a Keyboard
Labeling tracks and MDs using
the keyboard
If you use a keyboard, you can quickly enter names.
1 Press [Enter] while the deck is in one of the
operating modes listed below, depending on what
you want to label:
To label Press while the deck is
A track Playing, paused, recording, or stopped
with the track number displayed
An MD Stopped with total number of tracks
displayed
A flashing cursor appears in the display.
2 Enter a name.
In addition to letter keys, you can also use the keys
shown in the following table.
3 Press [Enter].
The whole name appears in the display.
Operations you may want to do while labeling a
track or an MD
To Press on the keyboard
Cancel the operation [Esc]
Switch between uppercase [Caps Lock]
and lowercase letters
Move the cursor [N] or [n]
Erase the character [Delete]
at the cursor position
Erase the character [Back Space]
preceding the cursor
z You can use any IBM*-compatible keyboard** with a
PS/2 interface.
* IBM is the registered trademark of International
Business Machines Corporation.
** Power consumption must be 120 mA or less.
Operating the deck using the
keyboard
You can operate the deck by using the keyboard keys.
This allows you to control the deck without using
buttons and control on the deck and on the remote.
As the keyboard substitutes Press
for the following functions
· (MD) [F1]
P (MD) [F2]
p (MD) [F3]
· (CD) [F5]
P (CD) [F6]
p (CD) [F7]
D.SKIP [F8]
AMS or = (MD) [F9]
AMS or + (MD) [F10]
AMS or = (CD) [F11]
AMS or + (CD) [F12]