Filter
Top Products
23
Locating a Specific Track
When the player is playing, paused, or stopped, use the
procedure below to quickly locate tracks.
Cueing to a track with the AMS
control (or ./> buttons on
the remote)
If you cue to a track while the player is playing, the
located track starts to play automatically. If you cue to
a track while the player is stopped or paused, the
player will stop or pause at the beginning of the
located track.
To cue to Do the following:
Numeric buttons
(1 to 20)
The next or a
succeeding track
during play or pause
Rotate the AMS control clockwise
(or press the > button on the
remote repeatedly).
A preceding track
during play or pause
Rotate AMS counterclockwise (or
press the . button on the
remote repeatedly).
The beginning of the
current track during
play
Rotate AMS counterclockwise (or
press the . button on the
remote once).
A specific track while
the player is stopped
Rotate AMS (or press the . or
> button on the remote
repeatedly) until the track number
you want appears in the display,
and then press the AMS control or
the HX button (or the H button
on the remote).
When you cue to a track while the player is playing,
the track starts to play automatically. If you cue to a
track while the player is stopped or paused, the player
will stop at the beginning of the track or starts to play
that track.
To enter a track number over 20
Press the >20 button on the remote, and then enter the
corresponding digits. To enter 0, press the 10 button
instead.
Example:
To play track number 30, press the >20 button, and
then the 3 and 10 buttons.
Locating a track by listening to
the beginning of each track
(Music Scan)
1 Press the MUSIC SCAN button on the remote.
After the first part of a track is played (scanned)
for the set number of seconds, Music Scan
continues with the next track.
2 Press the H button on the remote when you find
the track you want.
To change the scanning time of each track
The scanning time for Music Scan is factory set at 10
seconds.
1 While the player is stopped, press the MENU/
EXIT button.
2 Rotate the AMS control until “Music SCAN”
appears in the display, and then press the control.
3 Rotate the AMS control to select the scanning
time, and then press the control.
A scanning time of 6 to 20 seconds (in 1-second
intervals) can be set.
4 Press the MENU/EXIT button to complete the
setting.
Cueing to a track by entering the
track number from the remote
Press the numeric button(s) on the remote to enter the
number of the track you want to cue to.