Filter
Top Products
84
US
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND
TOTAL HARMONIC
DISTORTION: With 8 ohm loads, both
channels driven, from
20 – 20,000 Hz; rated
120 watts per channel
minimum RMS power,
with no more than 0.7 %
total harmonic distortion
from 250 milli watts to
rated output.
Amplifier section
Stereo mode 120 W + 120 W (8/4 ohms,
20 – 20,000 Hz, THD 0.7
%)
Surround mode Front: 120 W + 120 W
Center*: 120 W
Surround*: 120 W + 120 W
Surround back*: 120 W
(8/4 ohms, 20 – 20,000 Hz,
THD 0.7 %)
* Depending on the sound field settings and the source,
there may be no sound output.
Inputs (Analogue) ANALOG IN:
Sensitivity: 150 mV
Impedance: 50 kilohms
Inputs (Digital) DIGITAL IN OPTICAL:
DIGITAL IN
COAXIAL:
Impedance: 75 ohms
Outputs (Analogue) SUB WOOFER OUT:
Voltage: 3 V
Impedance: 100 ohms
PHONES:
Accepts low- and high-
impedance headphones
Outputs (Digital) DIGITAL OUT
OPTICAL
Super Audio CD/DVD system
Laser Semiconductor laser
(Super Audio CD/DVD:
λ = 650 nm)
(CD: λ = 780 nm)
Emission duration:
continuous
Signal format system NTSC
FM tuner section
System PLL quartz-locked digital
synthesizer system
Tuning range 87.5 – 108.0 MHz (100
kHz step)
Antenna FM wire antenna
Antenna terminals 75 ohms, unbalanced
Intermediate frequency 10.7 MHz
AM tuner section
System PLL quartz-locked digital
synthesizer system
Tuning range 530 – 1710 kHz (with the
interval set at 10 kHz)
531 – 1710 kHz (with the
interval set at 9 kHz)
Antenna Loop antenna
Intermediate frequency 450 kHz
Video section
Inputs Video:
1 Vp-p 75 ohms
S-video:
Y: 1 Vp-p 75 ohms
C: 0.286 Vp-p 75 ohms
Component:
Y: 1 Vp-p 75 ohms
P
B/CB: 0.7 Vp-p
P
R/CR: 0.7 Vp-p
Outputs Video:
1 Vp-p 75 ohms
S-video:
Y: 1 Vp-p 75 ohms
C: 0.286 Vp-p 75 ohms
Component:
Y: 1 Vp-p 75 ohms
P
B/CB: 0.7 Vp-p
P
R/CR: 0.7 Vp-p
Specifications