Sony AVD-C700ES Stereo System User Manual


 
Other Operations
67
US
Controlling the VCR with the
remote
1 Press RM SET UP and AV [/1
simultaneously.
The RM SET UP indicator lights up and “IR
SET” appears in the remote’s display.
2 Select “VIDEO1” or “VIDEO2” using
Cursor key, and then push Cursor key.
3 Enter your VCR’s manufacturer code
(see the table) using Cursor key.
4 Push Cursor key after you have
selected the 3-digit code.
When the registration is completed, the RM
SET UP indicator flashes twice.
Code numbers of controllable
VCR
Press FUNCTION and select “VIDEO1” or
“VIDEO2” using Cursor key.
If more than one code number is listed, try
entering them one at a time until you find the one
that works with your VCR.
Controlling the VCR
Press FUNCTION and select “VIDEO1” or
“VIDEO2” using Cursor key, and then push
Cursor key. Sources that can be controlled by
the remote change depending on the setting of
VIDEO1 or VIDEO2.
You can control your VCR using the buttons
below.
Manufacturer Code number
SONY 701,702,703,704,705,706
AIWA 710,750,757,758
AKAI 707,708,709,759
BLAUPUNKT 740
EMERSON 711,712,713,714,715,716,750
FISHER 717,718,719,720
RM SET UP
Cursor key
AV ?/1
FUNCTION
GENERAL
ELECTRIC
721,722,730
GOLDSTAR 723,753
GRUNDIG 724
HITACHI 722,725,729,741
ITT/NOKIA 717
JVC 726,727,728,736
MAGNAVOX 730,731,738
MITSUBISHI/MGA 732,733,734,735
NEC 736‘
PANASONIC 729,730,737,738,739,740
PHILIPS 729,730,731
PIONEER 729
RCA/PROSCAN 722,729,730,731,741,747
SAMSUNG 742,743,744,745
SANYO 717,720,746
SHARP 748,749
TELEFUNKEN 751,752
TOSHIBA 747,755,756
ZENITH 754
By pressing You can
AV [/1 Turn the VCR on or off.
NUM and Cursor
key
Select a channel.
ENTER Confirm the selected channel.
AUDIO Change the audio.
CH –/+ Change VCR channels.
m/M Fast Forward or fast Reverse.
H Play.
X Pause.
x Stop.
AV MENU Display the menu.
DVD DISPLAY The display is on or off.
C/X/x/c/ ENTER Select the item in the program
guide or menu.
Manufacturer Code number
continued