Sony AVD-C700ES Stereo System User Manual


 
24
US
To turn on the receiver
Press POWER on the receiver. The receiver
enters standby mode and the STANDBY
indicator lights up in red. Press "/1 on the
remote. The receiver turns on and the
STANDBY indicator turns off. In standby
mode, the receiver also turns on by pressing
Z,
DISC 1-DISC 5, or FUNCTION –/+ on the
receiver or by pressing H.
To turn off the receiver
Press "/1 on the remote. The receiver enters
standby mode and the STANDBY indicator
lights up in red. To turn off the receiver
completely, press POWER on the receiver.
While playing a disc, do not turn off the receiver
by pressing POWER. Doing so may cancel the
menu settings. When you turn off the receiver,
first press x to stop playback and then press "/1
on the remote.
To select a disc using the remote
Press DISC and select “DISC 1-DISC 5” or
“D SKIP” using Cursor key, then push Cursor
key.
Tips
If a disc is already inserted in a disc tray, you can play
it back simply by pressing H or its corresponding
DISC 1-DISC 5, even if the previous music source
was not a DVD. The function changes to DVD and
playback starts (Auto-Function).
However, if Program Play is on, you can only start
playback by pressing H.
• The DISC indicators change as follows:
light blue: the disc tray is selected, or the disc is
being played back.
off: there is no disc.
dark blue: a disc is placed on the disc tray,
however, the disc tray is not chosen.
Before the disc existence is checked, the indicators
are in dark blue.
Saving power in standby mode
Press "/1 on the remote once.
Tip
While the receiver is in standby mode, the STANDBY
indicator on the receiver lights up.
To cancel standby mode
Press "/1 on the remote once.
Additional operations
* You cannot pause during JPEG playback.
To Press
Stop x
Pause* X
Resume play from pause X or H
Go to the next chapter,
track, scene, or file in
continuous play mode
>
Go back to the preceding
chapter, track, scene, or file
in continuous play mode
.
Stop play and remove the
disc
Z on the receiver or
OPEN/CLOSE on the
remote.
Mute the sound MUTING. To cancel
muting; press it again
or VOLUME + to
adjust the sound
volume.
Change a disc while playing
another disc
Press EX-CHANGE on
the receiver.
Play the desired disc directly Press DISC 1-DISC 5
on the receiver or press
DISC on the remote
and select “DISC 1-
DISC 5” using Cursor
key, then push Cursor
key.
X
H
x
./>
VOLUME +/–
MUTING
OPEN/
CLOSE
Cursor key
DISC