Filter
Top Products
Playing Discs
25
US
Notes
• Do not push the disc tray when closing it. Press Z on
the receiver or OPEN/CLOSE on the remote to close
the disc tray.
• If DVD playback is paused for approximately one
hour, the receiver automatically turns off.
You can open the disc tray while playing a disc,
to check what discs are to be played next or
replace discs without interrupting play of the
current disc.
1 Press EX-CHANGE.
The disc tray opens and two disc
compartments appear. Playback of the
current disc continues.
2 Replace discs in the compartments
with new ones.
The receiver plays the disc in the left side
compartment after the current disc, and then
the one in the right side compartment.
3 Press DISC SKIP.
The disc tray turns and other two disc
compartments appear.
4 Replace discs in the compartments
with new ones.
5 Press EX-CHANGE.
The disc tray closes.
Notes
• Do not push the disc tray to close it in Step 5,
as you may damage the receiver.
• If “REMOVE” is displayed in the front panel
display, remove the disc in front of you and
turn off the receiver once, and then turn it on
again.
Replacing Discs While
Playing a Disc
VOLUME
PHONES
POWER
STANDBY
SOUND FIELD
TUNER/PRESET FUNCTION
A. F. D.2CH
MODE DISPLAY
DISC 1 DISC 2 DISC 3 DISC 4 DISC 5
EX-CHANGE DISC SKIP
DISC SKIP
EX-CHANGE