Filter
Top Products
8
Adjusting the speaker volume
To enjoy Dolby Pro Logic Surround sound, turn
on the Dolby Pro Logic mode, then adjust the
volume of each speaker using the test tone
provided by the system.
MmX
>
.
x
H
h H
v
V
B
b
h H
B/b
VOLUME +/–
VOLUME
MODE SELECT
?/1
(Power)
Step 2: Setting up your
speakers (continued)
1
1
2, 4
3
Multi stick
PUSH ENTER
1 Press PRO LOGIC (or PRO LOGIC
ON/OFF on the remote).
“PRO LOGIC ON” appears.
2 Press T.TONE ON/OFF on the remote.
Each speaker will emit a test tone in the
following order. Adjust the volume of the
test tone.
t LEFT t CENTER t RIGHT
REAR L T REAR R T
3 From your listening position, press
CENTER LEVEL (+/–) and REAR
LEVEL (+/–) on the remote to adjust
the volume.
For the rear level, the rear right speaker will
emit sound.
The volume levels from each speaker must
become the same.
4 Press T.TONE ON/OFF when you are
done adjusting.
The test tone turns off.
Tip
If you turn VOLUME (or press VOLUME +/– on the
remote) all the speaker volumes change.
Note
The test tone feature works only for Dolby Pro Logic
Surround sound.
To adjust the speaker balance
You can adjust the balance of the front speakers
and the rear speakers.
1 In step 2 above, select RIGHT, LEFT or
CENTER to adjust the front balance, and select
REAR R or REAR L to adjust the rear balance.
2 Press B or b on the remote (or move the multi
stick on the unit toward b or B) and adjust the
balance.
Tip
You can adjust the speaker balance using the “Sound
Mode” menu.
1 Press MODE SELECT repeatedly to select “Sound
Mode”, then press PUSH ENTER.
2 Move the multi stick toward b or B repeatedly to
select “Front Balance” or “Rear Balance”, then
press PUSH ENTER.
3 Move the multi stick toward b or B repeatedly to
adjust the balance, then press PUSH ENTER.