Filter
Top Products
33
Sound Adjustment
Sound Adjustment
Adjusting the sound
You can reinforce the bass, create a more
powerful sound, or listen with headphones.
GROOVE
V-GROOVE
GROOVE-EX
PHONES
For a powerful sound (GROOVE)
Press GROOVE. The volume switches to power
mode, DBFB* is automatically set to full strength,
the equalizer curve changes, and the GROOVE
button lights. Press GROOVE again to return to
the previous volume.
* DBFB = Dynamic Bass Feedback
continued
Flashing part of a CD
— Flash
With the Flash function, you can “flash” the CD
sound during playback. This lets you create
original recordings.
MmX
>
.
x
H
h H
v
V
B
b
h H
FLASH
V/v
, Press and hold FLASH on the remote
during playback at the point you want to
start the Flash function, and release to
resume normal play.
To adjust the flash length
Press V or v repeatedly while holding FLASH on
the remote to select different flash lengths
(FLASH 1~20).
To use LOOP and FLASH
together
Press and hold both LOOP and FLASH at the
same time.
Notes
• The loop and flash length cannot be adjusted during
this operation. Adjust the loop and flash lengths
independently beforehand if necessary.
• To record the flash effect, use the analog (MD
OUT) connections or this unit’s tape deck.
?/1
(Power)
DJ Effect / Sound Adjustment