Filter
Top Products
6
6 Connect the power cord to a wall outlet.
If the supplied adapter on the plug does not
fit your wall outlet, detach it from the plug
(only for models equipped with an adapter).
To connect optional components
See page 48.
To deactivate/activate the
demonstration
When you set the time (“Step 3: Setting the time”
on page 9), the demonstration is deactivated.
To activate/deactivate the demonstration again,
press DISPLAY repeatedly while the system is
off.
Tip
You can reinforce the bass sound by connecting an
optional super woofer to the super woofer connector.
To attach the front speaker pads
Attach the supplied front speaker pads to the
bottom of the speakers to stabilize the speakers
and prevent them from slipping.
Inserting two size AA (R6)
batteries into the remote
]
}
]
}
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates the
system, replace both batteries with new ones.
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage.
When carrying this system
Do the following to protect the CD mechanism.
Make sure that all discs are removed from the
unit.
1 Press FUNCTION repeatedly until “CD”
appears in the display.
2 Hold down V-GROOVE and press ?/1 so that
“LOCK” appears in the display.
Step 1: Hooking up the system
(continued)