Filter
Top Products
Basic Operations
17
MmX
>
.
x
H
h H
v
V
B
b
h H
VOLUME +/–
TUNER/BAND
m M
. >
1 Press TUNER/BAND repeatedly to
select FM or AM.
2 Press . or > repeatedly to tune in
the desired preset station.
STEREO
* When only one station is preset, “ONE PRESET”
appears in the display.
To
Turn off the radio
Adjust the volume
To listen to non-preset radio
stations
Use manual or automatic tuning in step 2. For
manual tuning, press m or M repeatedly. For
automatic tuning, press and hold m or M.
Tips
• Pressing TUNER/BAND when the power is off
automatically turns the power on and tunes to the
last received station (One Touch Play). When the
system is in the Power Saving Mode, the One
Touch Play function does not work.
• You can switch from another source to the radio
just by pressing TUNER/BAND (Automatic Source
Selection).
• When an FM program is noisy, do the following
procedure:
1 Press MODE SELECT repeatedly to select “Set
Up Mode”, then press PUSH ENTER.
2 Move the multi stick toward b or B repeatedly
to select “TUNER Set Up ?”, then press PUSH
ENTER.
3 Move the multi stick toward b or B repeatedly
to select “Stereo Mono ?”, then press PUSH
ENTER.
4 Move the multi stick toward b or B repeatedly
to select “Mono”, then press PUSH ENTER.
“Mono” appears in the display.
There will be no stereo effect, but the reception will
improve. To restore the stereo effect, repeat steps 1
through 4 and select “Stereo” in step 4.
• To improve broadcast reception, reorient the
respective antenna.
Do this
Press ?/1.
Turn VOLUME (or press
VOLUME +/– on the remote).
Preset number*
Frequency