45
Other Features
8 Set the time to stop playback following
step 7.
9 Move the multi stick toward b or B
repeatedly to select the music source
you want.
Each time you move the multi stick toward
b or B, the display changes as follows.
t TUNER y CD Play T
t TAPE Play T
10 Press PUSH ENTER.
The type of timer (“Daily 1” or “Daily 2”),
followed by the start time, stop time and the
music source, appears, then the original
display appears.
11 Turn off the power.
To cancel the menu operation
Press MODE SELECT.
To check the setting
1 Press MODE SELECT repeatedly to select “Set
Up Mode”, then press PUSH ENTER.
2 Move the multi stick toward b or B repeatedly
to select “Timer Set Up ?”, then press PUSH
ENTER.
3 Move the multi stick toward b or B repeatedly
to select “Timer Select ?”, then press PUSH
ENTER.
4 Move the multi stick toward b or B repeatedly
to select the respective mode (“Daily 1” or
“Daily 2”), then press PUSH ENTER.
To change the setting, start over from step 1 on
page 44.
To cancel the timer operation
1 Press MODE SELECT repeatedly to select “Set
Up Mode”, then press PUSH ENTER.
2 Move the multi stick toward b or B repeatedly
to select “Timer Set Up ?”, then press PUSH
ENTER.
3 Move the multi stick toward b or B repeatedly
to select “Timer Select ?”, then press PUSH
ENTER.
4 Move the multi stick toward b or B repeatedly
to select “Timer Off”, then press PUSH
ENTER.
Tip
The power turns on 15 seconds before the preset time.
Notes
• You cannot activate DAILY 1 and DAILY 2 Timer
at the same time.
• You cannot set the timer if the starting time and
stopping time are the same.
• When you use the Sleep Timer, Daily Timer will
not turn on the system until the Sleep Timer turns it
off.
• You cannot activate Daily Timer and Timer-
recording at the same time.