59
Additional Information
Speaker
Front Speaker:
SS-ZX30AV for MHC-ZX30AV (Canadian,
European and Australian models)
Speaker system 3-way, bass-reflex type,
magnetically shielded type
Speaker units
Woofer: 17 cm, cone type
Tweeter: 5 cm, cone type
Super Tweeter: 4 cm, cone type
Nominal impedance 8 ohms
Dimensions (w/h/d) Approx. 250 x 375 x 285 mm
Mass Approx. 5.5 kg net per speaker
SS-ZX30AVW for MHC-ZX30AV (Other models)
Speaker system 3-way, bass-reflex type,
magnetically shielded type
Speaker units
Woofer: 15 cm, cone type
Super woofer: 15 cm, cone type
Tweeter: 5 cm, cone type
Nominal impedance 8 ohms
Dimensions (w/h/d) Approx. 250 x 375 x 325 mm
Mass Approx. 7.0 kg net per speaker
Rear Speaker (SS-RS170P):
Speaker system 1-way, 1-unit,
bass-reflex type
Speaker units
Full-range: 8 cm, cone type
Nominal impedance 8 ohms
Dimensions (w/h/d) Approx. 195 x 105 x 135 mm
Mass Approx. 1.0 kg net per speaker
Center Speaker (SS-CT170):
Speaker system 1-way, 1-unit,
bass-reflex type, magnetically
shielded
Speaker units
Full-range: 8 cm, cone type
Nominal impedance 8 ohms
Dimensions (w/h/d) Approx. 220 x 105 x 135 mm
Mass Approx. 1.1 kg net
For the customers in Canada
Use only the supplied SS-RS170P rear surround
speaker for connection to the REAR SPEAKER
connector, the supplied SS-CT170 center surround
speaker for connection to the CENTER SPEAKER
connector on the MHC-ZX30AV.
General
Power requirements
Canadian model: 120 V AC, 60 Hz
European model: 230 V AC, 50/60 Hz
Australian model: 230 – 240 V AC, 50/60 Hz
Mexican model: 120 V AC, 60 Hz
Thai model: 220 V AC, 50/60 Hz
Other models: 120 V, 220 V or
230 – 240 V AC, 50/60 Hz
Adjustable with voltage selector
Power consumption
Canadian model: 200 VA
European model: 200 watts
Other models: 210 watts
Dimensions (w/h/d) Approx. 250 x 375 x 395 mm
Mass
Canadian model: Approx. 12.5 kg
European model: Approx. 12.5 kg
Other models: Approx. 13.0 kg
Supplied accessories: AM loop antenna (1)
FM lead antenna (1)
Remote Commander (1)
Batteries (2)
Speaker cords (5)
Front speaker pads (8)
Design and specifications are subject to change
without notice.