Filter
Top Products
14
To
Stop play
Pause
Select a track
Find a point in
a track
Select a CD
in stop mode
Play only the
CD you have
selected
Play all CDs
Remove a CD
Exchange other
CDs while
playing
Adjust the
volume
Playing a CD (continued)
Do this
Press x.
Press CD NX (or X on the
remote). Press again to resume
play.
During play or pause, press > (to
go forward) or . (to go back).
Press and hold down M or m
during play and release it at the
desired point.
Press one of the DISC 1~5 buttons
(or D.SKIP on the remote).
1 Press MODE SELECT
repeatedly to select “Set Up
Mode”, then press PUSH
ENTER.
2 Move the multi stick toward b or
B repeatedly to select “CD Set
Up ?”, then press PUSH ENTER.
3 Move the multi stick toward b or
B repeatedly to select “Play
Mode Set Up ?”, then press
PUSH ENTER.
4 Move the multi stick toward b or
B repeatedly to select “Play
Mode 1 Disc”, then press PUSH
ENTER.
1 Press MODE SELECT repeatedly
to select “Set Up Mode”, then
press PUSH ENTER.
2 Move the multi stick toward b or
B repeatedly to select “CD Set
Up ?”, then press PUSH ENTER.
3 Move the multi stick toward b or
B repeatedly to select “Play
Mode Set Up ?”, then press
PUSH ENTER.
4 Move the multi stick toward b or
B repeatedly to select “Play
Mode All Discs”, then press
PUSH ENTER.
Press one of the A 1~5 buttons.
Press one of the A 1~5 buttons
to open the tray that contains
the CD that you want to change.
When you change the CD, press the
same button to close the tray.
Turn VOLUME (or press
VOLUME +/– on the remote).
Tips
• Pressing CD NX when the power is off
automatically turns the power on and starts CD
playback if there is a CD in the tray (One Touch
Play). When the system is in the Power Saving
Mode, the One Touch Play function does not work.
• You can switch from another source to the CD
player and start playing a CD just by pressing
CD NX or one of the DISC 1~5 buttons
(Automatic Source Selection).
• If there is no CD in the player, “No Disc” appears
in the display.
• When a disc tray is holding a CD, the indicator for
the tray lights orange. In the display, when a disc
tray holding a CD is selected (or the CD in the disc
tray is playing), the disc pointer indicator lights.
When a disc tray holding a CD is not selected, the
disc presence indicator lights, but the disc pointer
indicator does not light. When all disc trays are
empty, all the disc pointer indicators and all the disc
presence indicators light.
Note
When a tray has not been read by the unit, the disc
presence indicator may light even though there is no
disc on the tray.