Filter
Top Products
32
Selecting tape length
automatically
—Tape Select Edit
You can check the most suitable tape length for
recording a CD. Note that you cannot use Tape
Select Edit for discs containing over 20 tracks.
1 Insert a CD.
2 Press FUNCTION repeatedly until
“CD” appears in the display.
3 Press MODE SELECT repeatedly to
select “Set Up Mode”, then press PUSH
ENTER.
4 Move the multi stick toward b or B
repeatedly to select “CD Set Up ?”, then
press PUSH ENTER.
5 Move the multi stick toward b or B
repeatedly to select “CD Edit Start ?”,
then press PUSH ENTER.
The required tape length for the currently
selected CD appears, followed by the total
playing time for side A and side B
respectively.
Recording a CD by specifying
track order (continued)
DJ Effects
Looping part of a CD
— Loop
With the Loop function, you can repeat part of a
CD during playback. This lets you create original
recordings.
MmX
>
.
x
H
h H
v
V
B
b
h H
LOOP
V/v
, Press and hold LOOP on the remote
during playback at the point you want to
start the Loop function, and release to
resume normal play.
To adjust the loop length
Press V or v repeatedly while holding LOOP on
the remote to select different loop lengths (LOOP
1~20).