Filter
Top Products
10
To change the time
The previous explanation shows you how to set
the time while the power is off. To change the
time while the power is on, do the following:
1 Press MODE SELECT repeatedly to select “Set
Up Mode”, then press PUSH ENTER.
2 Move the multi stick toward b or B repeatedly
to select “Timer Set Up ?”, then press PUSH
ENTER.
3 Move the multi stick toward b or B repeatedly
to select “Clock Set ?”, then press PUSH
ENTER.
4 Perform steps 3 through 6 on page 9.
Note
The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
Step 4: Presetting radio
stations
You can preset a total of 30 stations (20 for FM
and 10 for AM).
. >
1 Press TUNER/BAND repeatedly to
select FM or AM.
2 Press and hold m or M until the
frequency indication starts to change,
then release.
Scanning stops automatically when a station
is tuned in. “TUNED” and “STEREO” (for a
stereo program) appear.
TUNED
STEREO
Step 3: Setting the time
(continued)
?/1
(Power)
1
Multi stick
PUSH ENTER
2
3