Sony HDW-M2000 Speaker System User Manual


 
Chapter 1 Overview
1-2 Chapter 1 Overview
1-1 Features
Basic operation buttons and jog/shuttle
dial
The basic buttons and jog/shuttle dial for VTR and
editing operations are provided in the conventional
VTR layout, ensuring continuity with conventional
operating panels.
Time data display
This can be selected to display a CTL counter value,
time code value, or time code user bits. It can also
display edit points and edit durations.
Menu-based control interface
The time data/menu display shows not only various
values and settings, but also the pages of a menu
system for commonly used functions. You can use the
function keys and MULTI CONTROL knob to easily
change settings.
Other operation settings, including interfacing with
external devices, can be set from the control panel by
the same type of setup menu system as on a
conventional VTR.
High quality variable speed playback and
digital jog sound function
In HDCAM format playback, the dedicated playback
DT heads allow smooth, noiseless playback. During
Betacam SX playback, noiseless playback is achieved
through unique multihead playback technology.
In slow motion operation, the digital jog sound
function provides the same ease of operation as for a
conventional analog VTR.
Wide range of editing functions
By combining two units, you can carry out both
assemble editing and insert editing automatically. All
of the necessary editing functions are provided to set
and amend edit points, to preview and review results of
editing, and so on.
DMC editing
This allows automatic editing with a varying playback
speed memorized beforehand for an edit segment.
Split editing
In insert editing, this allows editing with the audio IN
and OUT points to be displaced from the video edit
points.
Preread editing
This allows you to play back prerecorded video and
audio material, edit it by applying effects with an
external device, and then rerecord in real time on the
same tape.
Cross-fade editing
In audio editing, to avoid unnatural effects at edit
points, you can fade the audio track. You can select
cut-in, fade-in, fade-out, or cross-fade.
Downward converter function
The unit has an HD-to-SD downward converter
function, and can output standard definition SDI,
analog component and analog composite signals even
while playing back an HDCAM format tape.
Upward converter function (HDW-M2000/
M2000P only)
The HDW-M2000/M2000P features a standard
definition to high definition (SD-to-HD) upward
converter as standard equipment. This allows high-
quality HD signals to be output even when playing
back tapes recorded in formats other than HDCAM.
Tele-File functions
Tele-File enables data writing/reading between
cassettes with memory labels and VTRs. It increases
the efficiency of operations such as recording,
playback and editing, and source data management.