Filter
Top Products
Chapter 4 Recording and Playback
Chapter 4 Recording and Playback 4-7
Playback in jog mode
In jog mode, you can control the speed of playback by
the speed of turning the search dial. The playback
speed range is ±1 times normal speed.
The playback speed range can be ±3 times normal speed by
changing the setting of setup menu item 116.
To carry out playback in jog mode, use the following
procedure.
1 Press the JOG button or search dial so that the JOG
button is lit.
Pressing the search dial toggles between jog mode
and shuttle mode.
2 Turn the search dial in the desired direction, at the
speed corresponding to the desired playback speed.
Playback in jog mode starts.
3 To stop playback in jog mode, stop turning the
search dial.
The function to toggle between jog mode and shuttle
mode each time the search dial is pressed can be
disabled by changing the setting of setup menu item
101.
Playback in shuttle mode
In shuttle mode, you can control the speed of playback
by the angular position of the search dial. The range of
playback speed is as follows.
• HDCAM tape: ±50 times normal speed (59.94i,
29.97PsF mode), ±58 times normal speed (50i, 25PsF
mode), ±60 times normal speed (24PsF, 23.98PsF
mode)
•Digital Betacam tape: ±50 times normal speed
•MPEG IMX tape: ±78 times normal speed
•Betacam SX tape: ±78 times normal speed
•Analog Betacam tape: ±35 times normal speed (525/
59.94 mode), ±42 times normal speed (625/50 mode)
There are detents on the search dial at the still position
and at ±5 times normal speed.
To carry out playback in shuttle mode, use the
following procedure.
1 Press the SHUTTLE button or search dial so that
the SHUTTLE button is lit.
Pressing the search dial toggles between jog mode
and shuttle mode.
2 Turn the search dial to the desired angle
corresponding to the desired playback speed.
Playback in shuttle mode starts.
3 To stop playback in shuttle mode, return the search
dial to the center position, or press the STOP
button.
The function to toggle between jog mode and shuttle
mode each time the search dial is pressed can be
disabled by changing the setting of setup menu item
101.
To return to normal-speed playback
Press the PLAY button.
Z
1 1,2,3
Z
1 1,2,33