Sony HDW-M2000 Speaker System User Manual


 
Appendix
A-8 Appendix
Specifications
HD/SD video output phase settings
For the HD/SD video output phase setting, you can use
the maintenance menu.
For details, refer to the Installation Manual.
Item number
Item name
Settings
M3 M3A:
OUTPUT
PHASE
SELECT
M3A0:
HD PHASE
SEL
Select the HD video output signal phase with respect to the reference signal: 0H
or -90H (HD) advanced.
0H : Output in sync with the reference signal.
–90H: Output with the phase delayed by –90H (HD) with respect to the reference
signal.
M3A1:
SD PHASE
SEL
Select the SD video output signal phase with respect to the reference signal: 0H
or –2H (SD) advanced.
0H : Output in sync with the reference signal.
–2H: Output with the phase delayed by –2H (SD) with respect to the reference
signal.
M3A2:
SD UPCNV
SEL (HDW-
M2000/
M2000P
only)
Select whether the SD video output signal phase in SD tape playback should be
in sync or one frame delayed.
noml : Output the SD video with the phase unchanged. (The HD video output is
delayed by one frame with respect to the reference signal.)
HD: Output the SD video with the phase delayed by one frame. (The HD video
output and SD video output are in phase the the reference signal.)
Notes
The SDSDI (D1) output and component/composite
outputs have the same phase.
For item M3A2 is HDW-M2000/M2000P only.
For details of the audio/timecode output phase, see Setup
menu item 338.