Filter
Top Products
56
9 Repeat steps 6 through 8 to
complete the name.
If you make a mistake, press CURSOR
N or n until the character you want to
change flashes, then repeat steps 6
through 8. To erase a character, press
EDIT/NO. Each time you press the
button, the character in the cursor
position is erased. You cannot insert a
character between previously input
characters.
10 Press ENTER/YES to complete the
labeling procedure.
The Station Name is stored in the
system‘s memory.
To cancel labeling
Press PRESET.
To check the name while tuning
Press DISPLAY.
Each time you press the button, the display
changes as follows:
nStation Name
µ
Frequency
µ
Clock
µ
Preset Equalizer menu
To erase the name
Repeat steps 1 through 5, then press EDIT/
NO repeatedly until all the letters are erased.
Using the Radio
Data System (RDS)
(European model only)
What is the Radio Data
System?
Radio Data System (RDS) is a broadcasting
service that allows radio stations to send
additional information along with the regular
program signal. This tuner offers a
convenient RDS feature, locating a station by
program type (PTY). RDS is available only
on FM stations*.
Note
RDS may not work properly if the station you are
tuned to is not transmitting the RDS signal properly
or if the signal strength is weak.
* Not all FM stations provide RDS service, nor do
they provide the same types of services. If you are
not familiar with the RDS system, check with your
local radio stations for details on RDS services in
your area.
Receiving RDS broadcasts
Simply select a station from the FM
band.
When you tune in a station that provides RDS
services, the station name appears in the
display.
To check the RDS information
Each time you press DISPLAY, the display
changes as follows:
n Station name
µ
Frequency
µ
Program type
µ
Clock
µ
Preset Equalizer menu
Labeling the preset stations
(continued)