Filter
Top Products
14
Step 1: Preparing CD for
recording
1 Press one of the CD 1 6 – CD 3 6
buttons to open the disc tray and
place a CD on the tray.
The disc tray closes when you press the
CD 1 6 – CD 3 6 button again.
2 Press the CD button to switch the
function to CD.
3 Press DISC SKIP repeatedly to select
the desired CD.
The selected CD 1 6 – CD 3 6
indicator lights green.
4 Press CONTINUE repeatedly until
“1 DISC” appears.
Step 2: Recording
5 Insert a recordable MD in the MD 1
slot.
Insert the MD securely so that it clicks
into place. If no MD is inserted, the MD
is automatically loaded after a while. If
MDs are inserted in other slots, the MD
you inserted in the MD 1 slot is
automatically loaded after pressing the
ENTER/YES button in step 8.
With the label
side up
With the arrow
pointing
toward the
deck
With the label
side up and the
shutter on the
right
6 Press REC/CD-MD SYNC.
7 Turn MULTI JOG until “NORMAL
?” appears.
8 Press ENTER/YES.
“SYNC” starts flashing, then remains lit
in the display. The MD deck stands by
for recording and the CD pauses at the
beginning.
9 Make sure that “SYNC” stops
flashing, then press (P.
Recording starts.
Both the CD player and the MD deck
stop automatically when the recording is
completed.
To stop recording, press p.
To cancel CD-MD Synchro
Recording
Press EDIT/NO at any point from step 6 to 9.
To stop CD-MD Synchro Recording
Press p.
If an MD is already loaded
Insert a recordable MD after removing the
loaded MD following the procedure below.
1 Press MD 6.
The MD is released and ejected.
2 Pull the MD from the slot.
123
1
SYNC
LEVELSYNC
1
DISC
NO RMAL ?
123
1
SYNC
LEVELSYNC
1
DISC
CD 1-1 0.00
Recording a whole CD on an MD
(continued)