Filter
Top Products
38
– Recording multiple
programs
10 Insert recordable MDs into the slots
corresponding to the desired
program numbers.
11 Press REC/CD-MD SYNC, then
turn MULTI JOG until “3PGM n
3MD ?” appears.
12 Press ENTER/YES.
“SYNC” starts flashing, then remains lit
in the display. The MD deck stands by
for recording and the CD player pauses.
If you use an MD with tracks already
recorded on it, the MD deck
automatically locates the end of the
recording and starts the new recording
from there.
13 Make sure that “SYNC” stops
flashing, then press (P.
Recording starts from the PROGRAM 1
through PROGRAM 3. When the
program changes, the corresponding MD
is loaded at the same time. Both the CD
player and MD deck stop automatically
when the recording is completed.
To cancel recording
Press p while programming the tracks, or
EDIT/NO after pressing the REC/CD-MD
SYNC button.
To stop recording
Press p.
Recording your favorite CD tracks
on MDs (continued)
10 Insert a recordable MD in the MD 1
slot.
You can record only on the MD inserted
in the MD 1 slot. If the MD 1 indicator is
lit green, remove the already inserted
MD.
11 Press REC/CD-MD SYNC, then
turn MULTI JOG until “NORMAL
?” appears..
12 Press ENTER/YES.
“SYNC” starts flashing, then remains lit
in the display. The MD deck stands by
for recording and the CD player pauses.
If you use an MD with tracks already
recorded on it, the MD deck
automatically locates the end of the
recording and starts the new recording
from there.
13 Make sure that “SYNC” stops
flashing, then press (P.
CD starts playing and MD starts
recording. Both the CD player and MD
deck stop automatically when the
recording is completed.
123
1
SYNC
LEVELSYNC
-
PROGRAM
NORMAL ?
123
1
SYNC
LEVELSYNC
PROGRAM
1
CD 1-3 0.00
123
123
SYNC
LEVELSYNC
-
PROGRAM
1
3PG ->3 ?MDM
123
123
SYNC
LEVELSYNC
PROGRAM
1
CD 1-3 0.00