Filter
Top Products
Basic Operations
15
Playing an MD
You can play all the tracks on an MD in the
original order and also play up to three MDs
continuously just like CDs. To turn on the
system, press POWER.
1 Insert an MD.
Insert the MD securely so that it clicks
into place. Make sure that the MD
indicator lights orange or green.
2 Press the MD button to switch the
function to MD.
With the label
side up and the
shutter on the
right
With the arrow
pointing
toward the
deck
When recording is finished
Remove the MD. “TOC Write” flashes and
the recorded contents are memorized on the
MD.
While “TOC Write” is flashing
Do not move the unit or pull out the AC
power cord to ensure complete recording.
The deck updates the Table of Contents
(TOC) while “TOC” is flashing.
If the MD ends while recording
Both the CD player and MD deck stop
automatically.
Tips
• The track numbers and disc title of the CD (see
page 25) are copied on the MD when using a
brand-new recordable MD or an MD whose tracks
have been completely erased (see page 48) (Disc
Memo Copy function). Note that the CD-TEXT
information is not labeled on the MD depending
on CDs.
• If you record on an MD with tracks already
recorded on it, the recorded CD tracks are
renumbered.
Notes
• You can record only on the MD inserted in the
MD 1 slot when using this recording method.
• If “MD Protected” appears, the MD is protected
against erasure and cannot be recorded. Press
MD 6 to eject the MD, then slide the tab on the
side of the MD to close the slot (see page 33).
1
2
34
MULTI JOG
p
MD/CD 1 – 3
VOLUME
DISC SKIP
0/)
MD 6
MD indicators
POWER
continued
TAPE